Radial Engineering
WR8 500 Series Rack

Be the first to review this product

Item: N13-1961

Availability: In stock

$749.99
Free Domestic Delivery
World Wide Shipping
WR8 500 Series Rack
WR8 500 Series Rack WR8 500 Series Rack WR8 500 Series Rack

 

The Workhorse WR-8 is a trimmed down version of the Tec Award winning Workhorse power rack without the 8 channel summing mixer.

Like the Workhorse, the WR8 features eight slots to accommodate both Radial modules and other API Lunchbox™ compatible modules. An innovative slide-in tray makes loading modules easy! Rear connections include XLR and ¼" TRS inputs and outputs plus parallel connections via D-Subs. Unlike older API type racks that need to be hard patched, the WR8 features an innovative FEED switch that lets you connect modules in series by simply setting the switch to suit. This leaves the other connectors open for mult'ing, parallel processing and cross patching.

The WR8 provides extra power to the modules for more headroom with over 1600 milliamps of shared power for the 8 slots. This enables you to use power hungry devices like tube preamps with confidence. The external supply makes international travel easy with 100V to 240V compatibility and the use of a standard IEC connector. To keep modules safe, the WR8 is equipped with protective circuitry to prevent mishap should improper connections be made.

Features

  • 500 series power rack with room for 8 modules
  • Upgrades to full Workhorse with optional mixer
  • 100% compatible with older API type racks
  • Over 20% more current than the original spec

 

Questions on WR8 500 Series Rack

No questions asked yet

Ask Your Own Question






 

  • Circuit type: Connection buss from modules to connectors
  • Format: 19" rack mount, 3 rack space
  • Number of slots: 8
  • Input connectors: 8 balanced XLR male, 8 ¼" TRS, 25-Pin D-Sub
  • Output connectors: 8 balanced XLR female, 8 ¼" TRS, 25-Pin D-Sub
  • Compatibility: Adheres to the Whos-Doc and VPR Alliance
  • Omniport: Yes
  • Feed switch: Yes
  • Stereo link: Yes
  • 48V phantom power: Yes on all channels
  • Available current: 1600 milliamps
  • Average current: 200 mA per slot
  • Card slot impedance: Module dependent
  • Ground connections: Chassis & audio ground
  • XLR pin wiring:AES standard: pin-1 ground, pin-2 (+), pin-3 (-)
  • D-Sub pin wiring: Follows Tascam D-Sub standard
  • Power supply: External 100V - 240V AC with 48V Phantom
  • PSU Connection: Locking 5 pin XLR female on cable
  • Dimensions (W x H x L): 13.25" x "21.50 x 11.25" (337mm x 546mm x 286mm)

Customer Reviews

Write Your Own Review

You're reviewing: WR8 500 Series Rack

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating