An advanced tremolo that does much more than traditional pedals.
The Empress Tremolo2 is an original design built from the ground up to include innovative features without sacrificing tone. The audio signal path is analog, but the tremolo effect is controlled digitally via opto technology.
Tap tempo, selectable waveforms, a choice of 8 rhythms and a full preset system capable of storing up to 8 presets are all at your fingertips. The control port allows control over the Tremolo2 via external tap tempo, expression pedal, control voltage and MIDI, making the tremolo2 more powerful than ever!
- Pristine sound
- Modulate your sound with three different waveforms. An asymmetrical tremolo, square wave and triangle wave setting
- Tap Tempo averages your last four taps. Also choose different tap to tremolo rate ratios. 1:1, 3:4, 1:2, 1:3 and 1:4
- You can also set it to play different rhythms
- Aa gain stage on the output delivers up to 12dB of gain without adding any distortion to the signal
- Save all your settings in up to 8 presets and recall with the touch of a button
- True Bypass
Questions on Tremolo2 Tremolo Effect Pedal
No questions asked yet
Ask Your Own Question
- Power Input Voltage: 9 - 12 V DC (Negative tip)
- Power Input Connector: 2.1mm barrel connector (Negative tip)
- Power Consumption: 100mA
- Enclosure Material: Die Cast Aluminum
- Input connector: 1/4" Jack
- Output connector: 1/4" Jack
- Height (Enclosure only): 1.5"
- Height (including controls): 2"
- Length: 3.5"
- Width: 4.5"
- Input Impedance: 1 Meg
- Output Impedance: 330 Ohm
- Frequency Response: (-3dB) 4Hz - 30kHz
- Input Headroom: +9.8dBu
- Output Headroom: +9.2dBu
- Distortion: 0.40%
- Signal to Noise: 107.7dB