NOTE: This is for a DIY project and will require assembly. Listing includes PCB + PIC + FRONT PANEL ONLY. No components are included except the PIC chip.
Due to the nature of DIY projects, no returns allowed on kits that have been attempted to be assembled or with missing components.
The Trans Europa can take a 1V/octave input signal, modify it by changing it's octave, transposing it and adding glide and then output it. The octave can be switched over 9 octaves from -4 to +4, there is a CV control over the octave as well. Semi-tone transposition is from 0 or no transposition to +12, which also has a voltage control input. There are 8 different modes for transposing, the first is just chromatic semi-tones, the others are chords, so that if you sequence the transposition you can create arpeggios of specific chords. There is also a gated glide with an amount knob and gate input and an LED to indicate when the glide is active.
This module can be used to add octave switching to a VCO that does not have that feature, it can turn an LFO into an arpeggiator, and it can enable TB303 type gated glide sequences.
- Octave switching over 9 octaves from -4 to +4
- Transpose with 8 different modes
- Gated glide
- CV control over octave and transpose
Questions on Trans Europa Octave Switching Transposer PCB + PIC + Panel - 10HP
No questions asked yet
Ask Your Own Question
- Eurorack Format
- 10HP Width
- 50mm Depth
- +12v: 26mA Current Draw
- -12v: 20ma Current Draw