NOTE: The 1U row in this case is only compatible with Pulp Logic, Synthrotek and Vermona 1U modules. Intellijel 1U modules are not compatible with this case.
Synthrotek introduces the original ‘7U 104HP Waterproof’ Eurorack Case! This case keeps Eurorack modules safe while traveling and in the great outdoors.
Synthrotek has taken a very rugged SeaHorse brand case (very similar to Pelican) and fit it with 6U and 1U 104HP vector rails and filled them with 25 square rail nuts per row (2.5mm), giving users three rows to fill with modules (2 rows of standard 3U Eurorack and 1U of tiles). Perhaps the coolest part about this case is the 2.5in lid depth. There's enough space for users to close up the case with all user patches still plugged in. Now users can setup anywhere and be ready to play!
The lid is also removable and held in by grenade-style hinge pins. Synthrotek can position the 1U section in the middle, at the top next to handle, or at the bottom near the hinges.
- Two 3U Rails at 104HP
- One 1U Rail at 104HP
- Case small enough to be a carry-on when traveling
- Wheels and extendable handle
- Automatic pressure purge system
- Equipped with Synthrotek Power and 2 Noise Filtering Power Distribution Boards (enough to power 34 modules or more with added flying bus cables)
- Molded-in padlock hole (fits standard size Masterlocks®)
- Available with easy-to-install Panel Kits supplied with o-rings and screws
- Screws included
- Color: Safety Yellow (OSHA)
- Optional padded detachable shoulder strap
- Made in the U.S.A.
Questions on Waterproof 7U Portable Eurorack Case - 104HP
No questions asked yet
Ask Your Own Question
- Eurorack Modular Case System
- 2 Rows of 3U at 104 HP (Total of 208 HP)
- 1 Row of 1U at 104 HP (Tile Size)
- 158mm Depth
- Outside Dimensions: 23.96" x 16'' x 10.1" (60.86cm x 40.64cm x 25.65cm)
- Inside Dimensions: 22.46" x 13.88" x 8.49" (57.05cm x 35.26cm x 21.56cm)
- Lid Depth: 2.5'' (6.25cm)
- Weight (including power supply brick): 16.85 pounds (7.64 kg)
- Power Brick is included: 12V DC 5A Center-Positive, 5.5mm sleeve and 2.5mm interior barrel pin
- Current Draw: 2.2A @ +12V, 1.3A @ -12V, 1.5A @ +5V