In 2011 we set out to create the most realistic spring reverb simulation ever. The Spring Theory was born with authentic sound, feel and dynamics. Since then we’ve been taking notes for the next evolution: The Super Spring Theory.
Drip Splash Kerplang
We’ve captured every nuance of tube driven spring reverb by analyzing design, sound and the physics of real reverb tanks. Even something as innocuous as unplugging your guitar cable (kerplangagnangang) sounds like real authentic springs. While much gear was evaluationed the main inspiration for the spring setting is still our 68 Twin Reverb. Unlike the amp you can bend nature of physics with the decay control. We also added a tone control and an internal trimmer for running hotter signals in to the reverb.
We’ve retained an all analog signal path for your clean signal with an improved preamp. JFET amplifiers carryout the send and recovery of the reverb signal for even more tube like dynamics. The Super Spring Theory is even better in front of overdrive pedals or a dirty amp.
Improving overall performance was not enough. We’ve been listening and we know what you want. We’ve packed a ton of new features in the same pint sized pedal. Now you can hear reverb tails when bypassed. Separate level controls for the dry and reverb sounds along with the new wide range tone control allow for subtle reverb to in your face salt water splash.
…But wait, There’s more!
There’s also that other reverb setting. ROOM. Don’t think of this as your typical subtle ambiance room reverb. That is certainly possible with the decay knob rolled back. It simulates a space where you can modify the very nature of physics. Longer decay times are like a cavern covered in ceramic tile with reverb trails over three minutes long.
Like no other reverb pedal on earth.
Every aspect of the Super Spring Theory was designed from the ground up. You won’t find a “reverb brick” inside. It’s not a datasheet design from someone else. The Super Spring Theory uses our own DSP reverb algorithms that you can’t get anywhere else.
- All analog signal path for your clean sound to retain your tone.
- Redesigned preamp for tube like dynamics and feel.
- Reverb Level Control
- Dry Level Control
- Decay Control
- Tone Control
- Trails On/Off Switch
- Spring/Room Switch
- Bypass Footswitch
Questions on Super Spring Theory Reverb
No questions asked yet
Ask Your Own Question
- Powered by a regulated 9VDC to 18VDC adaptor with a negative center 2.1mm barrel style plug
- If using a “daisy chain” power supply, all other pedals MUST be negative ground
- Current draw is less than 100mA
- Length 4.4″ X Width 2.3″ X Height 1.0"
- Input impedance- 1M
- Output impedance- 1K
- Designed and handcrafted in Oregon
- Die-cast metal enclosures for durability
- Red LED indicator
- Three-year limited warranty