NOTE: This 1U module is only compatible with Pulp Logic, Synthrotek or Vermona 1U cases. It is not compatible with Intellijel 1U cases.
The Pulp Logic ’S&H’ is a simple but highly useful Sample & Hold in Eurorack Tile format. The S&H can act as either a sample-and-hold or track-and-hold depending on which input the clock is fed into. The signal “to be sampled” should be put into the upper left jack, and the output taken from the upper right. To run the Tile as a sample-and-hold, run a clock into the bottom left S&H input. To use the Tile as a track-and-hold, run a clock into the bottom right T&H input. It is safe to run a clock or different clocks into each of the S&H and T&H inputs.
- Two Modes of Operation: Sample-and-Hold or Track-and-Hold
- Tile Unit
Questions on S&H Sample & Hold Tile - 6HP
No questions asked yet
Ask Your Own Question
- Eurorack Tile Module
- 6 HP Width / 1 Tile Unit
- 30mm Depth
- Current Draw: 5mA @ ±12V
- Power Cable: Tile Tail (3-pin)