Shop Now, Pay Later with Affirm. Learn More

Rupert Neve Designs
Portico 5032-H Single CH Mic Pre/EQ

Be the first to review this product

Item: N13-Neve-Portico-5032-Horizontal

Availability: In stock

$1,795.50
Portico 5032-H Single CH Mic Pre/EQ
Portico 5032-H Single CH Mic Pre/EQ Portico 5032-H Single CH Mic Pre/EQ

Rupert Neve Designs Portico 5032-H Single CH Mic Pre/EQ

The Portico 5032-H, from Rupert Neve Designs, boasts the same preamp design as their 5012 unit, but adds a Never-tailored equalizer for even more inherently musical sonic quality. Combined with Rupert Neve’s famous Silk controls, the 5032 is capable of imparting a truly vintage flavor to any incoming audio signal. Though the interface is especially suitable for front-end operation, its EQ section features a line-level input, meaning it can be used during mixdown too. 

The 5032 consists of a single channel microphone preamplifier and EQ, the latter featuring its own independent input. The mic preamp is the same as that found in the 5012, albeit with the inclusion of a 3-band EQ. In terms of performance, the interface boasts both high and low shelving curves, a parametric mid-band that extends from 80Hz to 8kHz in two ranges, and the same output stage as the 5012. 

Whether using the interface’s selectable mic or line input, users have full access to EQ, phase, Silk, and mute parameters. This means the 5032 functions superbly as the core module in a more extensive mixing system, or as a self-contained mixer for standalone operation. 

This is the HORIZONTAL version of the Portico 5032.

Portico 5032-H Features

  • High Pass Filters: Continuously variable swept frequency from 20Hz to 250Hz
  • Slope: 12dB/octave
  • Gain: Unity to +66dB in 6dB steps, Trim continuously adjustable from -6dB to +6dB
  • Buss Output: Output is designed to feed a Buss-mix Amplifier at the internal system level of -2.5 dBu
  • Maximum Output Level: Maximum output from 20Hz to 40kHz is +25dBu
  • Mute: Mutes Main Output only
  • Total Harmonic Distortion and Noise at 1kHz, +20 dBu: Better than 0.001 percent
  • Total Harmonic Distortion and Noise at 20Hz, +20dBu: Better than 0.002 percent
  • Total Harmonic Distortion and Noise @ 20Hz, +20dBu with Silk Engaged: Better than 0.2 percent second harmonic
  • Low Shelving EQ: +/- 15dB boost or cut. Corner frequency 160Hz
  • High Shelving EQ: +/- 15dB boost or cut. Corner frequency 8kHz/16kHz, switch selectable
  • Mid Peak EQ: +/- 15dB boost or cut. Continously variable frequency, 80 to 800Hz or 800Hz to 8000Hz switchable
  • Phantom Power: +48 Volts DC +/- 1 percent

Questions on Portico 5032-H Single CH Mic Pre/EQ

No questions asked yet

Ask Your Own Question






 

  • Preamp Type: Solid State
  • Number of Channels: 1
  • Frequency Response: 10Hz-160kHz (@ 3dB)
  • Phantom Power: Yes
  • EQ: Yes
  • Compression: No
  • Analog Inputs: 1 x XLR (Mic), 1 x XLR (Line)
  • Analog Outputs: 1 x XLR, 2 x 1/4" (Buss)
  • Digital Inputs: No Digital Inputs
  • Digital Outputs: No Digital Outputs
  • Other I/O: No Other I/O
  • Rackmount Spaces: 1/2 Rack Space (1U)
  • Height: 1.75"
  • Power requirements: Voltage range: 9V to 18V DC
  • Connector: 5.5mm X 2.1mm DC jack, Center Positive

Customer Reviews

Write Your Own Review

You're reviewing: Portico 5032-H Single CH Mic Pre/EQ

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating