The Open Sound Module is a WiFi connectivity module. It sets up a wireless network connection directly with your modular synthesizer. The OSM has two CV inputs and two CV outputs, along with two trigger inputs and outputs, for bi-directional wireless communication.
Use the OSM to connect your modular synthesizer to your mobile phone, tablet, laptop, local network or the mighty internet. Use two OSMs to connect together two racks, whether they are in the same room, or even the same continent. Use many to make the biggest modular synthesizer in the world!
The OSM communicates using the OSC protocol. It can connect to your local WiFi network or set up its own access point. The Open Sound Module embeds a small web server, enabling you to control and configure the device with a browser.
The module sends an OSC message when there is a change in the signal connected to an input jack. When it receives a matching OSC message it changes the signal at the corresponding output jack. Default address mappings and value ranges are shown below, they can be changed in the web configuration.
- WiFi: 802.11b/g/n
- Security: WEP/WPA/WPA2
- Access Point and WiFi Client
- Embedded Open Sound Control server
- Embedded web server
- 12bit Analogue to Digital converters
- 12bit Digital to Analogue converters
- 2 CV inputs
- 2 CV outputs
- 2 gate/trigger in
- 2 gate/trigger out
Questions on Open Sound Module WiFi Connectivity - 6HP
No questions asked yet
Ask Your Own Question
- Eurorack Module
- Width: 6HP / 101.30mm
- Depth: 32mm
- Current Draw: 250mA@+12v, 20mA@-12v