Shop Now, Pay Later with Affirm. Learn More

Mungo Enterprises
s0 Sampler and Sequencer - 12HP

Be the first to review this product

Item: N13-4129

Availability: In stock

$599.00

$483.97

s0 Sampler and Sequencer - 12HP

Mungo Enterprises s0 Sampler and Sequencer

The Mungo Enterprises s0 combines both sampling and sequencing functionalities into a single Eurorack module. Samples are sourced via .WAV files that are loaded onto the module via SD card, or via live sampling.

In addition to more traditional sampling functionality, the s0 allows for phase-locked loops and formant synthesis. The module can be used for simultaneous sampling and playback duties.  

NOTE: the s0 requires the Zoom module in order to function (sold separately.)

s0 Features

  • Start - Sets the position at start of playback (Ratiometrically scaled with the Waveform)
  • Loop Start - Sets the position for the Start of Looping (Ratiometrically scaled with the Waveform)
  • Loop Width - Sets the position for the End of Looping (Ratiometrically scaled with the Waveform and added to the Loop Start Position)
  • Granular Width - Exponentially scaled, sets the size of the Grains used for Pitch Shifting (Extreme small settings disable Pitch Shifting and Interpolation)
  • Gate Input - Positive going edge triggers Sampler Start and Negative going edge triggers the End of Looping
  • Sampler Frequency - Signal Input and Sampler Playback Frequency Control scaled in V/Octave
  • Granular Frequency - Signal Input and Looper Playback Frequency Control scaled in V/Octave
  • Input - Audio Input for recording to Looper Buffer
  • Reset Input - Positive going edge triggers reset and synchronization of Looper Playback (0.01Hz to 2.5kHz)
  • Load Button - Swaps between the two loaded loops (when zooming in loads from the SD card to the Sampler), when zooming out the Load Button loads the Looper Buffer not in use from the SD card or if no card is present from the Audio Input
  • Trigger Button - Triggers Sampler and sets Looping Mode as Reversing/Looping/Single-Shot when Zoom Control is held at +/0/- respectively
  • Sampler Output - Output Signal of the Sampler
  • Looper Output - Output Signal of the Looper
  • SD Card - Reads 16bit Mono .WAV files off FAT formatted SD cards from S0.WAV to S9.WAV in sequence, Sample Rate insensitive (Maximum Length 500,000 Samples)

Questions on s0 Sampler and Sequencer - 12HP

No questions asked yet

Ask Your Own Question






 

  • Eurorack Module
  • 12 HP Width
  • 48mm Depth
  • Current Draw: 25mA @ +/-12V, 150mA @ +5V
  • Requires +5V in Power Bus

Customer Reviews

Write Your Own Review

You're reviewing: s0 Sampler and Sequencer - 12HP

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating