The Malekko Richter series of modules offer the same great sound, ergonomics, musicality, and quality that made the Wiard 300 series legendary, at a fraction of the cost and size in Eurorack modular format.
The Malekko/Wiard Oscillator is a great-sounding, solid analog Oscillator/LFO with some serious tricks up its sleeve.
Fine and Coarse frequency controls are provided. Volt per octave and exponential (with attenuator) CV frequency inputs are provided. An output for each waveform is provided (Sine/Triangle/Square/Saw). A second series of outputs are provided for phase-modulated versions of the Triangle, Square, and Saw waveforms. The phase of the 2nd series of waveforms is determined by the Phase control, along with the Phase CV input (with attenuator).
Many great modulation effects can be produced by using the various outputs of this Oscillator in a patch. Pull out the large Fine/LFO control to enter low range, and your Oscillator becomes a phase-modulated LFO! Set the 2nd series of outputs to a 90 degree offset and use external inverters to achieve full quadrature output.
One of our favorite patches with this module is modulating another oscillator's frequency and sending the modulated oscillator's output back to the Oscillator's Phase Mod input. Phase-Mod-Synced FM!
The Triangle 2 wave tends to create extra harmonics at various phase offsets, but the Sine wave provided by the Malekko Wiard Oscillator is one of the purest of any analog Oscillator.
Note: Tri2 has added harmonics.
- Four Waveform Outputs: Triangle, Square, Saw and Sine
- Additional Dual Outputs for Triangle, Square and Saw useful for Phase Modulation
- 1v/oct CV Input
- Attenuated CV Input for Frequency
- Pull on the large Knob "Fine" to go to LFO mode.
- Phase Mod Input with knob and Phase Control Knob
- Coarse Tune Knob
Questions on Richter Oscillator II - 14HP
No questions asked yet
Ask Your Own Question
- Eurorack Module
- 14HP Width
- +12v: 90mA current draw
- -12v: 90mA current draw
- 35mm Depth