A natural reverb that produces clean, warm tone without getting in the way of your signal.
The Silver Spring Reverb (SSR) is a compact, easy to use digital/analog reverb with a pure analog direct signal path. It creates a natural sounding ambient reverb that will not get in the way of your original signal. The Silver Spring Reverb’s bandwidth is in between the dark warmth of an amplifier’s spring reverb and the pristine clarity of a studio reverb.
There is no noise reduction system, in order to keep the decay as natural as possible. The direct signal path is all analog, going straight through analog amplifiers with no filtering. With the input set below the maximum there is no signal distortion or coloration. The Reverb signal path is filtered to produce the Silver Spring Reverb’s natural ambience.
The SSR’s sound is exceptional with a clean signal, but was specifically designed to work equally well with the tougher performance requirements of distorted tone. The SSR can be used before distortion, although it was primarily designed to go after. If you use the SSR before distortion, you may want to use a lower Reverb (Wet/Dry) setting.
- Time Control
- Reverb Control
- Tone Control
- Bypass Footswitch
Questions on Silver Spring Reverb Pedal
No questions asked yet
Ask Your Own Question
- Current consumption: 80mA@9V (DC adapter recommended)
- Voltage range: 6-9 V, 9 V 100mA preferred
- Input impedance: 500K
- Output drive capability: 10K Ohms
- Signal noise ratio: 90dB