Shop Now, Pay Later with Affirm. Learn More

Mackie
mackie-MR5mk3 Active Monitor Pair

Be the first to review this product

Item: N13-3346-Pair

Availability: Out of stock

$239.98
mackie-MR5mk3 Active Monitor Pair
mackie-MR5mk3 Active Monitor Pair mackie-MR5mk3 Active Monitor Pair mackie-MR5mk3 Active Monitor Pair

 

The MR5mk3 Studio Monitor from Mackie is a powered 5.25" 2-way reference speaker that is designed for mixing and monitoring in your home or project studio. It features an enhanced waveguide system that aims to minimize reflections and diffractions for a wider sweet spot, plus a custom-tuned rear port to help ensure an even bass response.

The speaker is equipped with matched amps and drivers for an optimized 50W class A/B bi-amplified system. It also has a two-level bass boost along with a high boost and cut control. These settings can be adjusted to customize the tuning of the speaker to compensate for acoustical deficiencies that may be present in your monitoring environment.

The MR5mk3 has been designed with flexibility in mind, featuring XLR, TRS and RCA monitor inputs. The speaker has been housed in an all-wood cabinet that has been treated with acoustic absorption material for a tighter response. Additionally, the MR10Smk3 studio subwoofer can be added for a more powerful, extended low end.

Features

  • 1" wave-guide loaded silk dome tweeter
  • 5.25" polypropylene woofer
  • Limiting and thermal protection circuitry
  • Magnetically shielded to fight RF interference
  • Minimum-diffraction molded baffle

Questions on mackie-MR5mk3 Active Monitor Pair

No questions asked yet

Ask Your Own Question






  • Frequency Response: 57 Hz - 20 kHz, (-3 dB)
  • SPL: 102 dB SPL @ 1m (+4 dBu into balanced input)
  • Maximum SPL: 108 dB SPL @ 1m (per pair)
  • Transducer: Low frequency: 5.25" (133 mm hyperbolic curved cone woofer), High frequency: 1" (neodymium magnet driven 25 mm silk dome tweeter)
  • Amplifier: Low frequency power: 30 watts, 4 ohm load, 60 watts peak. High frequency power: 20 watts, 8 ohm load, 40 watts peak Type: monolithic IC, class AB with DMOS power stage
  • Crossover: Crossover type: 24 dB/octave. Crossover frequency: 3 kHz Sensitivity: +4 dBu at 300 Hz for full output
  • Input Impedance: 20 kohm balanced bridging; 10 kohm unbalanced
  • Equalization: Low frequency EQ: +2 dB/+4 dB @ 100 Hz, shelving. High frequency EQ: +/- 2 dB @ 3 kHz, shelving
  • AC Power: 120 VAC, 60 Hz (US) 3-pin IEC 250 VAC, 16 A male connector
  • Fuse: 115 VAC: T 1 AL / 250 V. 230 VAC: T 500 mAL / 250 V
  • Power Consumption: 90 watts with music, loud mix 7 watts quiescent (idle)
  • Enclosure: .47" (12 mm) thick MDF with .98" (25 mm) MDF front panel
  • Damping Adiabatic batting
  • Dimensions: 11.3 x 7.8 x 10.9" (286 x 197 x 276 mm)
  • Weight: 12.1 lb (5.5 kg)

Customer Reviews

Write Your Own Review

You're reviewing: mackie-MR5mk3 Active Monitor Pair

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating