Entirely analog, dynamic audio processor with three independent channels. Two feature each an H-A-R envelope, a smooth 12dB multi mode filter, a low-noise VCA and essentially a fantastic saturation stage, with six different distortion types for each channel. Additionally there's a EQ-like filter with other distortions. Four outputs and an external audio input you can use as envelope trigger input, extending the machine's functions.
By using the 3 VCFs and 2 VCAs the IOTINE CORE creates a dense sound composite that is further enhanced with 14 unique saturation circuits. These SATs offer a range of component level extremes that add a variety of sonic textures that can be used with varying degrees of intensity.
The other equally important aspect of the IOTINE CORE is moving the sound with Dynamic Analog Modulation that is responding to the incoming audio. Two precise analog modulators follow one of 3 audio inputs down to the waveform level and offer a range of real time modulation that moves and affects the sound in harmony with any of the audio inputs. This creates an evolving and dynamic sound that is deeply engaging and responsive.
More than the sum of its parts, the IOTINE CORE creates an enjoyably powerful sound shaping tool that is sure to please.
The two main channels (CH1 & 2) can select from two 1⁄4” audio inputs and each includes a VCF and VCA along with 6 SAT circuits. The POST channel can run after CH1/CH2 either in parallel or in series with, or select from the two 1⁄4” inputs and includes a 2nd type of VCF along with division and octave circuits The 3 channels are mixed internally through a MIX out, or individually patched with their own 1⁄4” out.
Use with HARDWARE either directly connected into the inputs on the IOTINE CORE, or routed throughthe effects sends on a mixer. When using mixer sends: use 2 sends patched into the 2 inputs on the IOTINE CORE, and patch either the MIX output or the 3 individual outputs back into the mixer. If further sends are available, the separate channels of the IOTINE CORE can then be sent out to other effects, etc. Use with SOFTWARE by patching the IOTINE CORE into the soundcard or mixer connected to the computer. Audio tracks and or soft synths and samplers can be used live, or re-recorded back into the mix.
- INPUTS: IN1, IN2 (balanced/unbalanced 1/4”), EXT (unbalanced 1/4”).
- OUTPUTS: CH1, CH2, POST, MIX (balanced/unbalanced 1/4”).
- POWER: 90-264 vac 47-63hz
Questions on Iotine Core 3 Sound Processor
No questions asked yet
Ask Your Own Question
- (WxDxH) 19 x 6 x 5.25“ / 482 x 160 x 133mm
- 9Ibs / 4kg
- Table top or 3U rack mount usage