The ES84 – Peak & Trough module is a variation on the 1973 Classic Serge Peak andTrough module. It is much like the Analog Logic Peak and Trough, though a little lessprecise. Each section has a manual level pot. Both the Peak and Trough operate in therange of 0V to half of the positive power rail, i.e. 6V on a 12 volt system though in practice,you may find the Trough section does respond to input voltages going a volt or two below0V.The Peak section will output the highest of the four inputs when they exceed the MANUALPEAK setting while the Trough section willoutput the lowest of the four inputs when theygo below the MANUAL TROUGH setting.The Peak section can be used for combining gates from a sequencer whiel both sectionscan be used for combining waveforms, CVs or envelopes in unexpected ways.
- Modeled after the Serge Peak and Trough module from 1973.
- Gate generated when voltage in peak inputs 1-4 exceeds manual Peak Setting.
- Gate generated when voltage in trough inputs 1-4 is lower than manual Trough Setting
Questions on ES84 Peak & Trough Detector - 14HP
No questions asked yet
Ask Your Own Question
- Standard Eurorack Power: +12V/-12V/+5V