A-132-2 Quad VCA - 8HP

Be the first to review this product

Item: N13-4905

Availability: In stock

A-132-2 Quad VCA - 8HP


Module A-132-2 contains four linear VCAs with a common level control section for all four VCAs. The module can be used for all applications of simultaneous amplitude/level control of four different audio or CV signals. The module has a manual level control Amp. and two control voltage inputs CV1 and CV2 available. CV2 is equipped with a polarizer to adjust the effect and polarity of the external control voltage.

The A-132-2 is equipped with an internal connector that can be used to normalize the four input sockets to other modules. So far only the quadrature LFO/VCO A-143-9 is equipped with a suitable matching connector. To connect the A-132-2 and the A-143-9 no soldering is required. A short 10 pin ribbon cable with removable connectors on both ends is used. For the normalling to other modules (e.g. Quad AD/LFO A-143-1, Quad ADSR A-143-2, Quad LFO A-143-3 or other modules with several outputs like VCOs or multimode VCFs) the second side of the ribbon cable has to be wired manually to the outputs of the module in question.


  • Four Linears VCAs all controlled by two different CV controls
  • Simultaneous level control of up to four modulation or audio sources
  • Simultaneous FM effects with different audio signals with CV 1 or CV 2 in audio range

Questions on A-132-2 Quad VCA - 8HP

No questions asked yet

Ask Your Own Question


  • Eurorack Module
  • Width: 8HP
  • Depth: 50mm
  • Current Draw: 30mA @ +/-12V

Customer Reviews

Write Your Own Review

You're reviewing: A-132-2 Quad VCA - 8HP

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars