Expert Sleepers
Disting 16-in-1 Multifunction MK3 - 4HP

Be the first to review this product

Item: N13-2842

Availability: In stock

$179.00
Free Domestic Delivery
World Wide Shipping
Disting 16-in-1 Multifunction MK3 - 4HP

 

The Disting is a 16-in-1 multifunction module, offering a variety of CV and audio processes, including a selection of oscillators (LFOs/VCOs). All algorithms have two high-precision inputs and outputs, and a third control input, exposed on a front panel knob and a CV input.

The disting mk3 was introduced in November 2015. The main differences compared to the original version are the sizing, power and functionality. It is now only 43mm deep (originally 53mm) with over 50% less power consumption - now at 70mA combined draw (originally 148mA). The disting is now reprogrammable with user-updatable code via Micro SD card, and it is no longer limited to 16 functions. A new encoder and push button gives more menu controlling options. 

From firmware v3.3 onwards, if the disting detects a MicroSD card in its slot at power-up, another bank of algorithms becomes available which use the SD card for audio sample or MIDI file playback.

This algorithm continuously plays audio files, in a manner very much inspired by Tom Whitwell's Radio Music module. The current audio file is selected with the Z knob/CV. It plays, forever, at its natural speed (see the algorithms below if you want to control the speed), looping when it gets to the end; or it plays until the end of the file and stops, depending on the 'loop' setting. X is a retrigger input. A trigger pulse in excess of 1V will reset the playback position. The initial playback position is set by the Y input. The voltage range 0-8V corresponds to the length of the file so e.g. 0V input (or no input) sets the initial position to the start of the file, 4V input sets the initial position to halfway through the file, etc. When switching between files, the playback position is maintained, modulo the length of the new file.

 

Features

  • X & Y inputs, A & B outputs
  • Precision Adder
  • Linear/Exponential Converter
  • Sample & Hold with noise source & slew rate
  • LFO with thru-zero freq control & waveshaping
  • Four Quadrant Multiplier
  • Quantizer with selectable scales
  • Slew Rate Limiter
  • Clockable LFO
  • Full-Wave Rectifier
  • Comparator
  • Pitch and Envelope Tracker
  • VCO with Linear FM
  • Minimum/Maximum
  • Dual Waveshaper
  • Clockable Delay/Echo
  • VCO with waveshaping

Questions on Disting 16-in-1 Multifunction MK3 - 4HP

No questions asked yet

Ask Your Own Question






 

  • Eurorack Module
  • 4HP Width
  • 42mm Depth
  • Sample rate: 75kHz
  • ADC: 24 bit, THD+N -93dB, Dynamic range 99dB, SNR 99dB
  • DAC: 24 bit, THD+N -94dB, Dynamic range 105dB, SNR 104dB
  • Z input sample rate: 75kHz approx
  • CPU: Microchip PIC32MX at up to 50MHz
  • +12v: 50mA Current Draw
  • -12v: 20mA Current Draw

Customer Reviews

Write Your Own Review

You're reviewing: Disting 16-in-1 Multifunction MK3 - 4HP

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating