Shop Now, Pay Later with Affirm. Learn More

Dangerous Music
Source Monitor Controller

Be the first to review this product

Item: N12-1393

Availability: Out of stock

$899.00
Source Monitor Controller
Source Monitor Controller Source Monitor Controller Source Monitor Controller Source Monitor Controller

Dangerous Music Source Monitor Controller

The Dangerous Music Source provides one of the most crucial bridges in both the tracking and mixing process: the link between the engineer’s ears and the music. In each of the aforementioned scenarios, locating sweet spots, panning placement, and balancing kick and bass are all entirely dependent on accurate listening. 

Source contains a front panel headphone amplifier that allows for the connection of two headphones for discreet monitoring of four selectable sources, either simultaneously or independently. This can be used in a variety of advantageous ways, such as allowing a vocalist listen to their own mix while the engineer mixes the actual mix while listening through the other set of headphones.

Source Monitor Controller Features

  • Portable or rack installable (kit optional)
  • 2 Speaker outputs – can be engagned simultaneously
  • Headphones can monitor single or multiple sources
  • 2 Analog inputs: 1/8” mini stereo & XLR/TRS combo jack
  • 2 Onboard stereo 24-bit/192kHz D/A convereters
  • 2 Digital inputs: AES/SPDIF and USB
  • USB IN, up to 24-bit/192kHz for Windows and Mac

 

Questions on Source Monitor Controller

No questions asked yet

Ask Your Own Question






 

Input 1 to Selected Line Out and Speakers

  • Frequency Response: +0, -0.5dB from <10 Hz to >80 kHz
  • THD+N: < 0.0025%  @+4dBu
  • IMD  (SMPTE):  < 0.0025%  @ +4dBu
  • Crosstalk rejection:  >108dB
  • Noise: < -93 dB, unweighted
  • NOTE: Speaker outs can run at -6dB (factory setting) or unity gain (remove jumpers 3 and 4)
  • Maximum input level: > +26 dBu

Input 2 to selected line out and Speakers

  • Frequency Response : +0, -0.5dB from <10 Hz to >80 kHz
  • THD+N: < 0.0025%  @ +4dBu
  • IMD  (SMPTE): < 0.0026%  @ +4dBu
  • Crosstalk rejection: > -98dB
  • Noise: < -90 dB, unweighted
  • NOTE: Input 2 can run at -10dBV or -16dBV (by setting JP1 and JP2. Remove for -10dBV)
  • Default factory setting is -16dBV to accommodate 1/8” headphone outputs of iPhones and cell phones
  • Frequency Response: +0, -0.5dB from <10Hz to >50kHz

Outputs

  • The meter and speakers outputs are fully balanced and 600 ohm drive capable to >+26dBu.
  • Volume knobs track better than +- 0.5dB from unity to -40dB.
  • The headphone amp can easily drive several sets of cans.
  • Maximum output level: > +26 dBu
  • Shipping weight (in carton): 7 lbs.

Digital inputs

  • The AES inputs lock from 32kHz to 192kHz sample rates with the following: <0.004% THD+N
  • -0.2dB at 10 Hz and 22kHz (48kHz sample rate)
  • -0.2dB at 10Hz and 34kHz (higher rates)
  • Crosstalk Rejection: >103dB
  • Power Supply: 12 volt, 2 Amp (Part number PSU-SRC)
  • Optional Rack Kit: SRC (Source Rack Kit), $49.99 

USB Compatibility

  • Mac: Requires Mac OS 10.6 or higher for driverless plug and play
  • PC: Requires a driver for Windows operating systems up to Windows 7. *Not currently compatible with Windows 8.

Customer Reviews

Write Your Own Review

You're reviewing: Source Monitor Controller

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating