This module is an add on for the Tadpole 16 Step Sequencer. This will allow you to individually Mute each step specifically for the Gate output jack. The DUO Link switch requires you to have (2) Tadpole 16 Step Sequencers.
DUO Link expansion: On the back of the Tadpole Sequencer there are (4) Digital lines + (1) Ground pin to equal a 5 pin header. What the expander does is link A, B, C, D Digital Lines with another Tadpole Sequencer's Digital lines.
The DUO Link expansion allows you to get some really complicated sequences and beautiful melodies. This was some of the basic structure when Raymond Scott was building his Auto Composer Machine. The gate output even becomes melodic when connected to a pitch based control voltage on a vco.
Using an 10 pin IDC cable you connect the first sequencer to the Expansion module connector labled ' SEQ1', and the other Tadpole 16 Step Sequencer to 'SEQ 2'. On the first Sequencer you attach the 18 pin IDC cable to the 18 pin header on the Expansion Module.
If you purchase another Expansion module for the second Tadpole Sequencer the Duo Link would not be connected to any of the Sequencers. Blue Lantern plans to make other Blue Lantern Modules that can take advantage of 'talking to each other' using the DUO LINK connectors.
- Expands the Tadpole Sequencer from Blue Lantern Modules
- 16 Mute Switches for Gate Sequencing
- DUO Link On/Off Switch
Questions on Toad Expander for Tadpole Sequencer - 8HP
No questions asked yet
Ask Your Own Question
- Eurorack Module
- Requires Blue Lantern Tadpole Sequencer
- Only one 10 pin to 10 pin expansion ribbon cable is supplied
- 8 HP Width
- 1.5" Depth