The Blue Lantern 'Mini FM Joystick' Eurorack module allows for easy hands-on modulation of patches.
This module uses an attenu-inverter circuit for each of the two X and Y axis. Users can patch an LFO, VCO, etc and use the jotstick to FM an external VCO for example. When users use only the output on the Mini FM Joystick there is an internal 6.9V reference voltage so users can voltage control external modules. There are two attenuverters, both with inputs for fm action. When the joystick is in the middle it is 0v on both axis. When nothing is connected to the input on the joystick axis' there is an internal voltage so that users can bend CV (from the output) of one of the other modules in users' systems.
The push button outputs an internal gate voltage when nothing is connected to the top input, very useful for triggering envelopes and such. When users plug in something to the input it simply acts as a passive thru switch. Users can push the joystick to pass the signal.
- X & Y axis, spring loaded joystick
- Joystick pushes in as a Gate button — 6.9V Gate Output
- FM Bi-Polar Input per axis
- CV Output per axis
- External Input for passive switching via Gate button
- Output for Gate or External Input
Questions on MINI FM Joystick V2 XY CV Controller V2 RED - 6HP
No questions asked yet
Ask Your Own Question
- Eurorack Module
- 6 HP Width
- 35mm Depth
- Current Draw: 6mA @ +12V, 3mA @ -12V