Shop Now, Pay Later with Affirm. Learn More

Audio Damage
ADM10 Kompressor Stereo Compressor - 6HP

Be the first to review this product

Item: N13-4888

Availability: Out of stock

$289.00
ADM10 Kompressor Stereo Compressor - 6HP

Audio Damage ADM10 Kompressor Stereo Compressor

The Audio Damage Kompressor is a DSP buss compressor optimized for use in Eurorack modular synthesizers. The module features true stereo as well as mono-with-sidechain modes, making it efficient for a wide range of duties. Kompressor uses the same DSP code as that found in the Rough Rider, Rough Rider Pro, and Kombinant plugins, with the added benefits of CV alongside tactile manual control. 

ADM10 Features

  • Audio Damage ADM10 Kompressor Stereo Compressor Eurorack Module
  • The THRESH knob controls threshold (sensitivity) level, from 0dB to -60dB
  • RATIO is a scaled control — The first half of the rotation goes from 1:1 to 1:10, and from 12 o'clock to fully clockwise, it goes from 1:10 to 1:1000 (infinite)
  • The SPEED knob controls both the attack and release of the dynamics — At fully anti-clockwise, attack is 5ms and release is 50ms — At fully clockwise, attack is 100ms and release is 500ms
  • The MAKEUP knob adds gain to the final signal to compensate for attenuation in the compressor, from 0dB to +30dB — This leads directly to a soft-knee saturation stage; overdriving this stage provides everything from a mild "tube-like" saturation sound to full-on distortion, depending on the settings of the compressor stage
  • The MODE switch determines the unit's style of operation — In L/R mode, Kompressor is true stereo, while in M/SC mode, the LEFT input and output are the monophonic compressor — If a cable is plugged in to the RIGHT input, then the sidechain mode is activated, and the RIGHT input's level controls the gain reduction — The RIGHT input signal is passed through to the RIGHT output, for convenience's sake
  • Kompressor is a DSP-based effect that runs at 48kHz sample rate and 24 bit depth, via a high quality Cirrus-Logic codec
  • USB port (on the PCB board) for easy firmware updates
  • This module has an on-board regulator and does not require +5V
  • High-quality 100% Made In The USA construction, including panel-bolted 100,000-cycle BI potentiometers and custom stamped Rogan knobs
  • Kompressor, like all Audio Damage hardware products, includes our lifetime unconditional warranty

Questions on ADM10 Kompressor Stereo Compressor - 6HP

No questions asked yet

Ask Your Own Question






 

  • Eurorack Module
  • 6 HP Width
  • 25mm Depth
  • Current Draw: 40mA @ +12V, 9mA @ -12V

Customer Reviews

Write Your Own Review

You're reviewing: ADM10 Kompressor Stereo Compressor - 6HP

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating