Shop Now, Pay Later with Affirm. Learn More

Gate_Mod Dual VC Gate Mod Trig Delay - 4HP

Be the first to review this product

Item: N13-3772

Availability: Out of stock

Gate_Mod Dual VC Gate Mod Trig Delay - 4HP


The Animodule ‘Gate_Mod’ Dual Voltage Controlled Gate Mod / Trigger Delay is compact yet powerful Module that allows for gate length manipulation and event trigger delays with ease.

The Gate_Mod takes any incoming signal above ~1.1V making it very forgiving on Clock Inputs. It can then take this input and shrink it dow to 5ms or lengthen it up to 5 seconds. The Gate will appear at the Gate Out jack. When the Gate is over, a 10ms Trigger will turn on at the Delay Out. The Gate length can be set with the Time Potentiometer OR the CV Input.

The Gate_Mod’s switches allow for changes between Interrupt or Dividing Behavior (1 for each channel). When Interrupt is selected, the time will reset when Clock In receives a new Clock Pulse, essentially lengthening the Gate Out and Delay Out to the Time set + Time elapsed. So Gate will never go Low and Delay will never go High if Time is set longer than the interval between Clock Pulses (Useful when having staggered, irregular, or random Clocks). When Dividing is selected, Clock In will ignore any new Clock Pulses until it has finished the current running cycle.


  • Opamp Based Comparator Circuitry
  • Takes any signal above +1.1V
  • Normalized Delay 1 Output via Clock 2 Input Jack Switch

Questions on Gate_Mod Dual VC Gate Mod Trig Delay - 4HP

No questions asked yet

Ask Your Own Question


  • Eurorack Module
  • 4 HP Width
  • 37mm Depth
  • +12V: 35mA Current Draw
  • -12V: 18mA Current Draw

Customer Reviews

Write Your Own Review

You're reviewing: Gate_Mod Dual VC Gate Mod Trig Delay - 4HP

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars