Audio Damage
ADM10 Kompressor Stereo Compressor - 6HP

Be the first to review this product

Item: N13-4888

Availability: In stock

ADM10 Kompressor Stereo Compressor - 6HP


The Audio Damage ‘Kompressor’ is a Eurorack-format DSP-based buss compressor with true stereo and mono-with-sidechain modes. Useful for a wide range of tasks in modular rigs, Kompressor can smooth an out-of-control patch, glue together a drum mix or the master buss, and pump bass and synth lines for the dance floor. Kompressor uses Audio Damage’s time-proven dynamics DSP code, as heard and loved by thousands in the Rough Rider, Rough Rider Pro, and Kombinat plug-ins. By moving this technology into the modular world, Kompressor will find new and creative uses for dynamics processing as a part of sound creation and synthesis. 


  • Audio Damage ADM10 Kompressor Stereo Compressor Eurorack Module
  • The THRESH knob controls threshold (sensitivity) level, from 0dB to -60dB
  • RATIO is a scaled control — The first half of the rotation goes from 1:1 to 1:10, and from 12 o'clock to fully clockwise, it goes from 1:10 to 1:1000 (infinite)
  • The SPEED knob controls both the attack and release of the dynamics — At fully anti-clockwise, attack is 5ms and release is 50ms — At fully clockwise, attack is 100ms and release is 500ms
  • The MAKEUP knob adds gain to the final signal to compensate for attenuation in the compressor, from 0dB to +30dB — This leads directly to a soft-knee saturation stage; overdriving this stage provides everything from a mild "tube-like" saturation sound to full-on distortion, depending on the settings of the compressor stage
  • The MODE switch determines the unit's style of operation — In L/R mode, Kompressor is true stereo, while in M/SC mode, the LEFT input and output are the monophonic compressor — If a cable is plugged in to the RIGHT input, then the sidechain mode is activated, and the RIGHT input's level controls the gain reduction — The RIGHT input signal is passed through to the RIGHT output, for convenience's sake
  • Kompressor is a DSP-based effect that runs at 48kHz sample rate and 24 bit depth, via a high quality Cirrus-Logic codec
  • USB port (on the PCB board) for easy firmware updates
  • This module has an on-board regulator and does not require +5V
  • High-quality 100% Made In The USA construction, including panel-bolted 100,000-cycle BI potentiometers and custom stamped Rogan knobs
  • Kompressor, like all Audio Damage hardware products, includes our lifetime unconditional warranty

Questions on ADM10 Kompressor Stereo Compressor - 6HP

No questions asked yet

Ask Your Own Question


  • Eurorack Module
  • 6 HP Width
  • 25mm Depth
  • Current Draw: 40mA @ +12V, 9mA @ -12V

Customer Reviews

Write Your Own Review

You're reviewing: ADM10 Kompressor Stereo Compressor - 6HP

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars